Drilling Foam, which contains foaming agents with a synthetic base, stabilizers, preservatives and some other auxiliary chemicals. It can be applied between 0.5-1%. It has no harmful effect on the environment because it has a neutral pH and can be biodegradable. In water well drilling applications, when drilling is done with an air system, it has a high expansion characteristic. During work, it does not harm the skin in any way, it is washed off with water. This creates a carrier foam like shaving foam that expands and is stable. Compatible with all water-based drilling fluids. It is environmentally friendly and biodegradable. It reduces the need for air and allows for deeper drilling. It reduces the adhesion of soft clays to each other. It helps to clean the well and increases the feeding speed. light foam drilling; The foam is mixed with 0.1 - 0.5% water (2.5 - 4 liters per ton of water) and injected into the air stream. The amount of injection depends on the diameter of the well, compressor power and water flow rate. brilliant drilling; If water flow is high and compressor limits are reached, superfoam injection may be required up to 0.5-1% by volume (10 liters per tonne of water). As a starting point, 50 to 100 liters per hour can be injected into the air stream.
Product Description :
Product Specification & Product DRILCOLD
Appearance Light yellow transparent liquid
Density (g/ml, 20oC) 1.02 ±0.03
Viscosity (mm2/s, 20oC) <50
pH (20oC) 6.00-9.50
Mixing Ratio 0.1-1%
Expansion Ratio -
Freezing Point (oC) <-10
Available Fire Class -
Sea-water Availability -
